Copper Pipe

C11000 ETP Copper Pipe

We have with us rich process expertise so as to successfully handle the demands of ETP Copper Tubes. These are made available by us in diverse grades, dimensions as well as thickness options and are available at affordable prices so as to effectively meet clients' specific budgetary requirements. Being durable and sturdy in construction, these are corrosion resistant as well as deliver high performance standards.

Some of the specific features of these Electrolytic Tough Pitch (ETP) copper tubes are

Have high electrical & thermal conductivity
Have good corrosion resistance
Have good solder-ability
Have excellent hot and cold workability
Have high ductility
Are in conformance to ASTM and other industry specifications
Highly suitable for usage areas like general engineering, heat exchangers, solar panel, hardware areas

Product Applications:

Some of the areas where these are used in include:
Defense & Railways
Electrical & Electronic industry
Refrigeration industry
Heat Exchangers & Solar Panels
Hardware & General Engineering applications

Specifications:

EC / ETP Copper

ASTM B 68 C 12200
ASTM B 75 DLP C12000
BS 2871 Part 2 C 101
BS 2871 Part 3 C 106
EN 12451 DHP
JIS H3300 C 1220

Yes! I am Interested

C10100 Oxygen Free Electronic

C10100 Oxygen Free Electronic

Ask for Price

Copper, OFE, Oxygen Free Electronic. C10100 has conductivity 101% IACS, the highest among coppers. Used for electrical and electronic conductors, wave guides, cavity resonators, superconductor matrixes, vacuum tube and solid-state devices, and glass-to-metal seals. Chemical Composition:

	Cu	Pb	Ag	Zn	Fe	As	P	O	Sb	Te
Min	99.99	-	-	-	-	-	-	-	-	-
Max	-	0.0005	0.0025	0.0001	0.0010	0.0005	0.0003	0.0005	0.0004	0.0002

Physical Properties :

Product Property	Metric
Melting Point – Liquidus °F	1981
Melting Point – Solidus °F	1981
Density lb./cu in. at 68°F	0.323
Specific Gravity	8.94
Electrical Conductivity*% IACS at 68°F	101
Thermal Conductivity Btu/ sq. ft/ ft.Hr/ °F at 68°F	226
Coefficient of Thermal Expansion 68-57210⁻⁶ per °F (68 – 572°F)	9.8
Specific Heat Capacity Btu/ lb. /°F at 68°F	0.092
Modulus of Elasticity in Tension (ksi)	17000

Sizes Available

ROUND RODS	1.2 mm to 250 mm
HEX	1.2 mm to 250 mm
SQUARE	4 mm to 60 mm
FLAT	4 mm Min Thickness and max Width 120 mm
BILLETS	Up to 200 mm
INGOTS	As per Specification

Thermal Properties

Treatment	Minimum*	Maximum*
Annealing	700	1200
Hot Treatment	1400	1600

Yes! I am Interested

Medical Grade Copper Pipe

EN 13348 - Medical Grade Copper Pipe

Ask for Price

At Shree Extrusions Limited we proudly manufacture SHREE marked Medical Grade Copper Pipe used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, and Nursery etc.) Pipes facilitate this in most effective manner.

Shree marked medical grade copper tubes are manufactured as per EN13348/ BS EN 1057 specifications. The pipes are manufacturer under thorough inspections and quality control measures.

Shree marked medical grade copper tubes are available in size range 6mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard condition and length 3 meter or as per requirement.

Shree pipes are subjected to TPI by reputed agencies like Lloyds Register, SGS, and TUV as per customer demand.

TYPICAL USES for EN 13348 Medical Grade Copper Pipes- MGPS:
Medical Gas Distribution System for uninterrupted medical gas supply in hospital (ICCU, Operation Theater, Wards, Nursery etc.)

Product Details:

Particular		EN13348 Standard		SHREE
CHEMICAL COMPOSITION		Copper (Cu) + Silver (Ag)	99.90%	Spectro Analysis done per heat as per standard tolerances.
		Phosphorous	0.015% to 0.04%
CARBON CONTENT TEST		Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated.		Tested with Combustion Method as per EN723:2009
TENSILE / ELONGATION TEST
Temper		Tensile Strength MPa min.	Elongation A % min	Hardness (Indicative) HV 5
As per EN1773	Common Term
R220a	annealeda	220	40	(40 to 75)	Specifications maintained with help of In house testing facility.
R250	half hard	250	30	(75 to 100)
R290	hard	290	3	(min. 100)
DRIFTING TEST		Depending on Size and Temper Mandatory / Agreed Terms		Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST		EDDY Current Test for detection of local defects		EDDY Current Test conducted in accordance with EN 1971
CLEANLINESS		Proper Degreasing and End Capped		Our pipes are Degreased as per standard and End Caps are affixed.

TOLERANCE - Wall Thickness

Nominal Outside	Tolerance Wall Thickness
diameter (mm)	e< 1 mm(%)	e> 1 mm(%)
< 18	10	13
> 18	10	15

Medical Gas Pipeline System Size Range as per EN 13348 / BS EN 1057 Specification

Sr. No.	Outer Diameter MM	Wall Thickness MM	Wall Thickness Tolerance	Temper	Length (Meter)	Weight Per Meter (in Kg)
Dimension				Technical Details
1	10	0.6	+/- 10%	Half Hard	3 Meter	0.158
2	12	0.7	+/- 10%	Half Hard	3 Meter	0.222
3	15	0.9	+/- 10%	Half Hard	3 Meter	0.356
4	22	0.9	+/- 10%	Half Hard	3 Meter	0.533
5	28	0.9	+/- 10%	Half Hard	3 Meter	0.685
6	35	1.2	+/- 10%	Half Hard	3 Meter	1.139
7	42	1.2	+/- 10%	Half Hard	3 Meter	1.375
8	54	1.2	+/- 10%	Half Hard	3 Meter	1.78
9	76	1.5	+/- 15%	Half Hard	3 Meter	2.096
10	108	1.5	+/- 15%	Hard	3 Meter	2.992

Yes! I am Interested

Medical Gas Pipeline System

Medical Gas Pipeline System

Ask for Price

At Shree Extrusions Limited we proudly manufacture SHREE marked Medical Grade Copper Pipe used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, and Nursery etc.) Pipes facilitate this in most effective manner.

Product Details :

Standard	EN 13348 / BS EN 1057
Outer Diameter	10 - 108 mm
Wall Thickness	0.6 - 1.5 mm
Wall Thickness Tolerance	+/- 10%
Temper	Half Hard
Length	3 mtr

Yes! I am Interested