Looking for Product Name ?

DNV Certificate
Shree Extrusions Limited
Quality, Technology & Vision at its's Best
IndiaMART TrustSeal
Home About Us Quality We Provide Industrial Applications Certifications Media Gallery Contact Us Enquiry
Ingots Exporter
Shree Extrusions Limited
BRASS ALLOYS
BRONZE ALLOYS

COPPER ALLOYS
Others

Medical Grade Copper Pipe

- (MGPS AS PER EN 13348)


Medical Grade Copper Pipe
EN 13348 - Medical Grade Copper Pipe
PDF
At Shree Extrusions Limited we proudly manufacture SHREE marked Medical Grade Copper Pipe used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, and Nursery etc.) Pipes facilitate this in most effective manner.

Shree marked medical grade copper tubes are manufactured as per EN13348/ BS EN 1057 specifications. The pipes are manufacturer under thorough inspections and quality control measures.

Shree marked medical grade copper tubes are available in size range 6mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard condition and length 3 meter or as per requirement.

Shree pipes are subjected to TPI by reputed agencies like Lloyds Register, SGS, and TUV as per customer demand.

TYPICAL USES for EN 13348 Medical Grade Copper Pipes- MGPS:
Medical Gas Distribution System for uninterrupted medical gas supply in hospital (ICCU, Operation Theater, Wards, Nursery etc.)

Product Details:
Particular EN13348 Standard SHREE
CHEMICAL COMPOSITION Copper (Cu) + Silver (Ag) 99.90% Spectro Analysis done per heat as per standard tolerances.
Phosphorous 0.015% to 0.04%
CARBON CONTENT TEST Determining lubricant residue as total Carbon Content by measuring Carbon Dioxide Generated. Tested with Combustion Method as per EN723:2009
TENSILE / ELONGATION TEST
Temper Tensile Strength MPa min. Elongation A % min Hardness (Indicative) HV 5
As per EN1773 Common Term
R220a annealeda 220 40 (40 to 75) Specifications maintained with help of In house testing facility.
R250 half hard 250 30 (75 to 100)
R290 hard 290 3 (min. 100)
DRIFTING TEST Depending on Size and Temper Mandatory / Agreed Terms Conical Mandrel @ 45º with tube end expanding 30º
FREE FROM DEFECT TEST EDDY Current Test for detection of local defects EDDY Current Test conducted in accordance with EN 1971
CLEANLINESS Proper Degreasing and End Capped Our pipes are Degreased as per standard and End Caps are affixed.


TOLERANCE - Wall Thickness
Nominal Outside Tolerance Wall Thickness
diameter (mm) e< 1 mm(%) e> 1 mm(%)
< 18 10 13
> 18 10 15


Medical Gas Pipeline System Size Range as per EN 13348 / BS EN 1057 Specification
Sr. No. Outer Diameter MM Wall Thickness MM Wall Thickness Tolerance Temper Length (Meter) Weight Per Meter (in Kg)
Dimension Technical Details
1 10 0.6 +/- 10% Half Hard 3 Meter 0.158
2 12 0.7 +/- 10% Half Hard 3 Meter 0.222
3 15 0.9 +/- 10% Half Hard 3 Meter 0.356
4 22 0.9 +/- 10% Half Hard 3 Meter 0.533
5 28 0.9 +/- 10% Half Hard 3 Meter 0.685
6 35 1.2 +/- 10% Half Hard 3 Meter 1.139
7 42 1.2 +/- 10% Half Hard 3 Meter 1.375
8 54 1.2 +/- 10% Half Hard 3 Meter 1.78
9 76 1.5 +/- 15% Half Hard 3 Meter 2.096
10 108 1.5 +/- 15% Hard 3 Meter 2.992




Product Range

Brass Wires Specialized Brass Wires Brass Rods Specialized Copper Alloy Rods Ingots & Billet
Copper & Copper Alloy Tubes Bronze Rods Brass Tubes Copper Nickel
BRASS ALLOYS
Leaded Brass Naval Brass Nickel Silver Brass Red Brass Yellow Brass
Other Brass
BRONZE ALLOYS
Aluminum Bronze Silicon Aluminum Bronze Manganese Bronze Nickel Aluminum Bronze
COPPER ALLOYS
Beryllium Chromium Copper Copper Nickel Leaded Copper Other Copper

Home About Us Quality We Provide Industrial Applications Certifications Media Gallery Contact Us Enquiry

Member IndiaMART© Shree Extrusions Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited